新闻中心
NEWS INFORMATION
-
12
2024-03
石墨制品加工石墨模具车削用量和走刀量的选择
加工石墨制品石墨模具车削用量和走刀量的挑选 挑选走刀量,走刀量受机床和刀具的耐用度、工件所要求的精度和光洁度等的绑缚。当吃刀深度遭到加工余量的绑缚而取值不很大时,再尽或许用较大的走刀量S。但走刀量太大时,或许会引起机床最单薄的零件的损坏、刀片割裂、工件弯曲和加工石墨制品石墨模具表面光洁度下降。  ......
-
12
2024-03
石墨制品电子烧结石墨模具各种联轴器的特点
石墨制品电子烧结石墨模具各种联轴器的特征 在石墨制品电子烧结石墨模具操作期间,两个轴构件一向处于联接情况中,所述偶,它的作用是联接轴和两个运动和其间的扭矩传输,而且还能够吸收振荡,并以缓冲从遭到过大的联接构件大的负荷的影响。依据结构特征,可分为刚性联接和柔性联轴器联轴器分类;从分类精度的视点来看,可分为固定的关节和可动联接挠性......
-
12
2024-03
石墨制品半导体工业烧结用石墨模具材料的选择
石墨制品半导体工业烧结用石墨模具资料的挑选 烧结用石墨模具由于高纯石墨具有耐高温、纯度高、高温下规范安稳、耐热冲击功用好等特征,所以在半导体工业中广泛选用高纯石墨制作各种烧结模具。 (1)电子器材烧结用石墨模具。石墨烧结模适用于各种类型的二极管、三极管、可控硅管等器材的管心烧结,图为部分烧结模具实例。选用......
-
12
2024-03
石墨制品精密石墨模具加工在石墨化温度上的处理
石墨制品精密石墨模具加工在石墨化温度上的处理 一般的石墨化处理是升温到2400-2800℃然后冷却,低沸点的杂质如Si、Ca、Al和Mg都蒸发掉了。较费事的是难熔金属,它们构成高熔点的碳化物,一般这类碳化物在石墨化温度下是不分解的。硼的热中子吸收截面很高(75MPa),构成的碳化物熔点达2350℃,但一直到3500℃还不欢娱,......
-
12
2024-03
石墨制品原子反应堆石墨模具材料的类型
原子反应堆石墨模具资料的类型 在原子反应堆中可依资料的功用差异其用途,本文参阅原子能用语辞典,将石墨模具资料作主体资料大致分为以下几种: (1)减速资料:是在发生核分裂反应时,中子不被扑获而是经散射使之能量减少的物质,除石墨模具资料外还有轻水、重水、氮等 (2)反射资料:是为了从原子......
-
12
2024-03
石墨制品石墨密封环表面出现裂纹是否正常取决于多种因素
石墨制品石墨密封环是一种广泛应用于各种密封场合的元件,其资料具有较高的耐腐蚀性、耐高温性和出色的机械功用,因而遭到广泛欢迎。可是,在某些状况下,石墨密封环表面会呈现裂纹,这种状况是否正常取决于多种要素。 首要,咱们需求了解石墨制品石墨密封环的制造资料和工艺。石墨密封环一般由高纯度......
-
12
2024-03
石墨制品石墨密封环的优点
石墨制品石墨密封环的利益1.高耐腐蚀性 石墨制品石墨密封环具有很好的耐腐蚀性,能够用于各种酸、碱、盐等腐蚀性介质中。与其他金属密封材料比较,石墨不易遭到腐蚀,然后保证了密封功用的长期安稳。2.超卓的自润滑功用 石墨制品石墨密封环具有超卓的自润滑功用,能够在抵触过程中有效地下降抵触系数,减少磨损,行进密封寿......