新闻中心
NEWS INFORMATION
-
16
2024-03
石墨制品石墨密封圈表面出现裂纹的现象
石墨制品石墨密封圈是一种广泛应用于各种机械密封场合的密封元件,其外表呈现裂纹是一个比较常见的问题。但是,是否正常取决于裂纹的类型、产生原因以及影响。 首要,关于石墨制品石墨密封圈外表呈现裂纹的现象,需求具体情况具体分析。一般来说,假定是由于制造过程中产生的裂纹,且裂纹较为纤细,数量也较少,那......
-
16
2024-03
石墨制品石墨轴承磨损破坏的主要原因
石墨制品石墨轴承磨损损坏的首要原因 引起磨损损坏的首要原因是溃烂磨损和腐蚀磨损。通过对工艺流程检查剖析,磨料来自作业介质,首要由两部分组成,一是丁二烯储存罐的资料为16MnR,介质现已作业30年,腐蚀老化严峻,发生许多铁锈,并随作业介质进入机泵。 二是由于收回丁二烯进入泵体以及石墨制品石墨轴承引起冲突面表面擦伤,......
-
16
2024-03
石墨制品石墨轴承和密封的选择和更换方法
石墨制品石墨轴承和密封的挑选和替换方法 为了保证替换后的潜水泵的作业正常,选用合适的石墨制品石墨轴承和密封是十分重要的。在挑选和替换时,需留心以下三点: 1、石墨制品石墨轴承和密封的类型、标准、参数等应与潜水泵原有零件相同或相似; 2、替换石墨轴承时应留心轴承座的磨损状况,如有磨损应......
-
16
2024-03
石墨制品石墨轴承的使用环境
石墨制品石墨轴承的运用环境:根据运用部位及运用条件与环境条件挑选标准标准、精度,协作适宜的石墨轴承是保证轴承寿数及可行性的条件。 A、运用部位:圆锥滚子石墨制品石墨轴承适用于承受以径向载荷为主的径向与轴向的联合负荷,通常以两套轴承配对运用,首要应于轿车的前后轮毂、主动圆锥齿轮、差速器、减速器等传动部位。 ......
-
15
2024-03
石墨制品耐高温石墨板的热导率和照射蠕变系数
石墨制品耐高温石墨板的热导率和照耀蠕变系数 1)热导率:热导率与温度的联络随120照耀的改动如图所示。图中上图为照耀前,下图为照耀后,石墨制品耐高温石墨板热传导主要是因声子的散射所引起,其机理之一是因结晶境地上引起的散射,故与结晶的大小有关,结晶随照耀量的添加逐步紊乱,热导率与照耀初期比较急剧减少后,即便照耀量添加也几乎不再改......
-
15
2024-03
石墨制品生产对黏结剂性质的要求
石墨制品出产对黏结剂性质的要求 石墨制品出产对黏结剂性质的要求:(1)首要便是黏结力强;(2)此外,为了行进制品密度,还要求炭化率高;(3)在混捏成型工艺的操作温度下,其功能应坚持长期不变,能使混合糊具有超卓的流动性和可塑性;(4)石墨化性超卓;(5)价格便宜,杂质少等等。现在煤沥青就算是最适合的黏结剂了。&nbs......
-
15
2024-03
石墨制品高纯石墨块生产厂家生产高纯炭材料的物理试验方法
石墨制品高纯石墨块生产厂家在填好填充料的毛坯下方,通入石墨管,用以导入卤素气体。在填充焦炭比较懈怠的部分,可使气体均匀散布。挥发掉的卤化物,从C部分上升到炉子的上方,经过炉子上的风斗,被送入洗涤器,洗净后排人大气。在净化工序中,温度对净化效果的影响最为显着,虽然气体散布是均匀的,但净化温度与时刻的联络假如不适当,也相同不能行进净化效果。......