新闻中心
NEWS INFORMATION
-
9
2023-09
石墨制品制造过程中会出现的问题及如何防止其出现?
1、磨削加工 石墨制品在淬火、回火后一般要进行磨削加工,以下降表面粗糙度值。由于磨削速度过大、砂轮粒度过细或冷却条件较差等因素的影响,引起的石墨制品表层部分过热,形成部分显微组织改动,或引起表面软化,硬度下降,或产生较高的剩余拉应力等现象,都会下降石墨制品的运用寿数挑选适当的磨削工艺参数减少部分发热,磨削后在或许的条件下进行去应力处理,就可有效地......
-
9
2023-09
石墨制品的红硬性及其电解氧化的原因是什么?
石墨电解氧化法,该法又叫阳极氧化法,是以硫酸或硫酸与少数添加剂的混合液作为电解液,石墨置于电解液中,经过对两个电极通电的办法进行阳极的氧化,即依靠阳极氧化效果以及石墨在电化学场中的电位能克服石墨层间的范氏结合能,使插层离子进入层间,构成层间化合物。 它的作业原理首要是在外电场的效果下,在石墨周围集合......
-
9
2023-09
石墨坩埚如何进行浇铸?
1、当从大的倾转石墨坩埚炉倒出少数的金属时,鄙人一次浇注之间,坩埚应恢复至笔直的位置。2、不主张金属液在石墨坩埚中长时刻保温,这会缩短坩埚的使用寿命和下降冶金质量。3、让坩埚处于浇铸位置,继续加热,是不好的操作。这会导致吸气,金属烧损,坩埚壁腐蚀不均匀,提前损坏。4、一旦金属液到达所要求的铸造温度,而且按要求进行了除渣和除气,就应尽快地浇铸。5、特......
-
9
2023-09
石墨制品加热后会产生什么样的反应?
坩埚及有关用石墨制造的成型和耐火的坩埚及其有关石墨制品,例如坩埚、曲颈瓶、塞头和喷嘴等,具有高耐火性,低的热膨胀性,熔炼金属过程中,遭到金属浸润和冲刷时亦安稳,高温下良好的热震安稳性和优秀的传导性,所以石墨坩埚及其有关石墨制品被广泛用于直接熔融金属的工艺中。传统的石墨粘土坩埚用含碳量大于的鳞片石墨制造......
-
9
2023-09
石墨电极机电加工要求是什么?
石墨电极机电加工要求与特色 1.石墨电极的制造 专业的石墨电极制造主要选用高速机床来加工,机床安稳性要好,三轴运动要均匀安稳不振荡,而且像主轴这些反转精度也要尽可能的好。对一般的机床也可以完成电极的加工,只是编写刀路的工艺与铜电极有所不同。 2.EDM放电加工 石墨电极便是碳电极。因为......
-
9
2023-09
小口径石墨坩埚的作用?
小口径石墨坩埚具有杰出的热导性和耐高温性,在高温运用过程中,热膨胀系数小、对急热、急冷具有必定的抗应变性能。对酸碱性溶液的抗腐蚀性较强,具有优秀的化学稳定性。在冶金、机械、铸造、化工等工业部门,被广泛应用于合金工具钢的锻炼和有色金属及其合金的熔炼,有着较好的技能经济效果。 &nb......
-
9
2023-09
石墨模具放电需要注意什么问题?
除尘:因为石墨是细颗粒结构,在机械加工时,会发生许多的粉尘,对工厂环境有较大影响,此外粉尘对设备的影响主要体现在对设备电源的影响上,有石墨的导电性非常好进入电源箱后,简略形成电源短路等毛病,因此建议设备石墨专用加工机进行加工,但是因为石墨专用加工设备投资成本较大,许多企业在此方面均比较稳重,再这样的情......