新闻中心
NEWS INFORMATION
-
3
2023-11
石墨的特性成就了什么石墨制品?
跟着国际工业正在一日千里的向前打开,石墨已被国内外视为重要的工业矿藏材料之一,特别是最近几年,科学技术的打开,石墨制品已在各行各业发挥着重要作用。 石墨制品坚持了鳞片石墨原有的化学特性即耐酸性、抗腐蚀和物理特性即耐高温3000℃耐低温-204℃,它的抗压强度大于800kg/Cm2,而且抗氧化......
-
3
2023-11
为何说石墨制品是重要的战略资源?
光伏工业兴起不仅带动多晶硅需求的陡增,更会给特种石墨市场带来重大机遇。目前,石墨等碳素相关产品已被广泛应用于钢铁冶炼(废钢循环利用)、建筑、新能源、交通、锂电池、医疗设备和体育用品等范畴。 石墨是有机成因的碳质物蜕变而成,最常见于大理岩,片岩或片麻岩中。煤......
-
3
2023-11
石墨电极的发展历程是什么?
从上世纪90年代坐落于北京开展较早的,以某公司为首的企业一直秉承专业研制、出产石墨制品的企业。具有先进的数控出产设备及加工中心,出产技能精深,检测手法完备。从90年代初至今,因为产品功能优异,质量安稳,遭到国内外用户的一同好评。产品有:石墨电极,工业炉高温处理用石墨制品,金刚石东西烧结用石墨制品,有色金属练习用石......
-
3
2023-11
石墨块的加工处理标准是怎样的呢?
石墨块加工处理规范: 自然界中没有纯洁的石墨,其间往往含有SiO2、Al2O3、FeO、CaO、P2O5、CuO等杂质。这些杂质常以石英、黄铁矿、碳酸盐等矿产方法出现。此外,还有水、沥青、CO2、H2、CH4、N2等气体部分。因而对石墨的剖析,除测定固定碳含量外,还必须一同测定挥发分和灰分的含量。 &nb......
-
3
2023-11
生产石墨坩埚时的选材问题有哪些?
目前国内石墨坩埚出产工艺有两种:塑性成型出产工艺和冷等静压成型出产工艺。以粘土为粘结剂的塑性成型工艺出产周期长,劳动强度大,工效低,用煤烧成,污染大,但因出资少,国内多采用此工艺;而等静压设备压制成型工艺采用清洁动力天然气烧结,则从根本上处理了污染问题,且减少出产工序近10道,周期短,工效高。 &nbs......
-
3
2023-11
冶金中石墨坩埚的加热过程是怎样的?
石墨坩埚是用极耐火的资料所制的器皿或熔化罐,一般在运用时,一般会将坩埚盖斜放在坩埚上,以避免受热物跳出,并让空气能清闲进出以进行或许的氧化反应。坩埚因其底部很小,一般需要架在泥三角上才能以火直接加热。一、资料参与顺序 石墨坩埚放入炉内,最好是等自身红透,先放一点小型的金属碎料在坩埚底,再放金属锭。&nb......
-
3
2023-11
石墨坩埚使用中出现纵向裂纹的原因是什么?
石墨坩埚运用中出现纵向裂纹的原因: 1、石墨坩埚在长时间运用后,坩埚壁出现纵向裂纹,并且裂纹处的坩埚壁较薄。(原因剖析:石墨坩埚即将或现已抵达运用寿数,坩埚壁会变薄,承受不了过大的外力。) 2、初次运用(或靠近全新)的坩埚鄙人沿出现裂纹并贯穿坩埚底部。(原因剖析:将冷却的石墨坩埚放......