新闻中心
NEWS INFORMATION
-
20
2023-12
石墨制品加工后的调试要求是什么?
石墨制品加工后的调试要求: 石墨制品加工后需要进行产品调试,首先,需要对产品进行全面查看,保证其符合授权要求。其次,应对焊缝位置进行查看,防止出现焊缝缺点。后边在测量尺寸并查看产品的准确性。 石墨制品的加工工艺技术要求严格,需要遵从一系列的规定和操作规程,企业应充分了解加工方式和要求,采取相应措施,保证产......
-
20
2023-12
普通石墨轴承与铜石墨轴承的不同是什么?
轴承是机械工程中较为常用的1种滑动机械部件,所选质料上又有金属资料、非金属资料、复合资料之别。伴随着机械设备的功用要求,在金属资料轴承的底子上开发规划并发展壮大了起来的石墨轴承,以石墨资料为首要底子资料。 轴承有滚动轴承和滑动轴承之分,石墨光滑轴承多应用于......
-
20
2023-12
浸渍石墨轴承有什么设计与制造?
石墨材料结构的多样性来源于石墨/石墨原子间化学键合的多样性,由此也供给了石墨材料的可规划性。浸渍石墨轴承因为它的生产工艺和原材料的可规划性为规划与制造供给了一定空间,然后可制造出功能各异,适用于多种技术条件和运用环境的浸渍石墨轴承。PV值是轴承规划时的重要参数PV=P*V,P--单位面积载荷压力,MPa;V--轴......
-
20
2023-12
石墨电极容易积碳有什么原因?
1、加工规准运用不当,超出放电截面电流密度承受能力,脉间过小,放电能量的施加不是随意的,想加工得快一点就把电流施加得大一点,放电加工规准中一般指的是峰值电流,即脉冲处于导通时流过放电通道的电流,电流效果的时刻很短,取决于脉冲导通时刻,即脉宽。在加工设备上电流表所闪现或模仿电流表所闪现的电流值为脉冲电流的平均值,由......
-
20
2023-12
石墨块/石墨板焙烧填充料的要求和加工是什么?
石墨块/石墨板焙烧填充料的要求和加工 石墨块/石墨板填料在焙烧过程中起到维护产品免受氧化的作用,一起向焙烧产品传递热能,挥发物也经过填料之间的间隙排出。因此,填料应具备以下要求: (1)在焙烧最高温度1300T的条件下不熔化、不烧结。 ......
-
20
2023-12
石墨块的用途是什么?
石墨块具有超卓的导电性、耐高温性、耐酸性、碱腐蚀和易加工性。因此,它被广泛应用于冶金、化工、电化学等工作。 石墨块的最大用处是在半导体领域,但它也广泛用于太阳能电池、传感器、纳米电子、高性能纳米电子器件、复合材料、场发射材料等领域。 石墨块也广泛用于工业,可用于制作高温熔炼坩埚、钢......
-
20
2023-12
为什么石墨块可以做密封环?
在石墨工业中,众所周知,石墨制品在许多的作业中被得到广泛的运用。石墨密封圈信任经常在石墨圈里走动的同伴们都是知道的。 石墨具有导电性、超卓的导热性、优异的耐腐蚀性和其他的金属材料不行替代的特征。被选作为密封材料也是自有它的特别特征的。碳石墨环具有耐高温、自润滑、低摩擦系数、耐磨、热膨胀系数低......