新闻中心
NEWS INFORMATION
-
15
2024-01
石墨制品加工零件夹具选择是什么
1、在供认石墨制品工件在作业台上的位置时,有必要考虑每个位置的加工方法、刀具长度和刚度对加工质量的影响。 2、加工石墨制品所用的夹具应尽可能是通用零件设备和可调夹具,可有用缩短生产预备周期。 3、关于石墨制品零件加工的装夹方法,应合理挑选定位基准和装夹方案。在挑选基准时,要遵循“基......
-
15
2024-01
排列石墨制品加工顺序的注意事项
1、摆放石墨制品加工次序,遵照“先孔后边”、“先粗后细”的基本原则。2、供认刀具点和换刀点。一旦供认,就不适宜替换。3、依据刀具的会合石墨制品加工,可以更好地防止同一刀具的重复使用,减少刀具替换的次数和时刻。4、关于同轴度要求较高的孔系,悉数孔系都应在一次定位后进行石墨制品加工,然后在其他孔系的坐标方位进行加工,这样可以有用消除重复定位带来的差错,......
-
15
2024-01
石墨制品是什么
因为石墨具有许多优秀的功用,因而在冶金、机械、电气、化工、纺织、国防等工业部门获得广泛运用。可作耐火资料。石墨制品坚持了鳞片石墨原有的化学特性还具有很强的自润滑功用。石墨粉的特性即高强耐酸性、抗腐蚀和耐高温3000℃以及耐低温-204℃,同时它的抗压强度大于800kg/Cm2,并且抗氧化,在450℃空......
-
13
2024-01
石墨制品等静压石墨模具如何做抗氧化处理
石墨制品等静压石墨模具在生产出来后,为了更好的保护模具,一般都需要进行抗氧化处理,一般选用抗氧化剂来进行。 当石墨制品等静压石墨模具的运用温度在1300℃以内的氧化环境中,它的抗氧化效果非常好。各种类型的石墨模具经过石墨模具抗氧化保护剂的渗透处理后,其液体能渗入到等静压石墨模具的气孔中,在石墨模具气孔及......
-
13
2024-01
石墨制品石墨模具的浸渍
石墨制品异形石墨模具经过石墨模具抗氧化保护剂浸渍处理后,其液体可以深化到石墨模具的气孔中,在石墨模具气孔及石墨模具表面构成一层0.02mm左右的抗氧化保护膜。 这层保护可以有用阻隔空气防止发生氧化反响,有用抵挡石墨制品石墨模具的氧化,延伸石墨模具的运用寿数。石墨制品异形石墨模具: ......
-
13
2024-01
石墨制品石墨模具有什么异型特点
石墨制品石墨模具在人们现下的日子中运用非常的广泛,一般在我们的日常日子中,许多人对石墨模具专业知识把握是不太多的。 1、耐磨性能。胚料在磨具凹模中塑性变形转性时,沿凹模表层既流动性又拖动,使凹模表层与胚料间形成剧烈的磨擦,可能会导致磨具因损坏而无效。因此原材料的耐磨性能是石墨模具较基础、较要害的特性之一。  ......
-
13
2024-01
石墨制品石墨管道分类
石墨制品石墨管道是指不透性石墨管与管件的组合。石墨管分压型管与浸渍管两类。(1)压型管 石墨制品石墨压型管由石墨粉与必定份额的树脂混捏后揉捏成型而得,又称为石墨塑料管。石墨压型管多用作换热管。(2)浸渍管 浸渍石墨管又分为两类,一类是热固性树脂石墨压型管经高温(700℃)焙烧后浸渍树脂,或以沥......