新闻中心
NEWS INFORMATION
-
29
2024-02
石墨制品内圆锥面加工
石墨制品内圆锥面加工 石墨制品加工零件时,内锥很难加工,由于存在检测、切屑去除和冷却等问题。最大的问题是确认刀盘的进给量,需要工人依托阅历和重复调整来完毕,难以确保加工的质量和功率。锥角和标准精度的测量方法通常是锥塞规的颜色方法。可是,这种方法遭到不同的出产设备和不同形状的零件在现场的束缚。关于普通机床上深孔零件的......
-
28
2024-02
石墨制品正级烧结石墨匣钵主要于哪些地方
在工业生产中,要想达到的铸造作用,不只要挑选适宜的石墨资料,还要设计石墨模具、工艺质量以及正确的使用设备。有十多年的石墨加工经验,资料选用进口高纯等静压石墨。手机玻璃石墨制品正级烧结石墨匣钵和热弯石墨模具具有抗氧化性好、使用寿命长、加工精度高的特点。是国内半导体分立器材封装工厂的挑选。 &n......
-
28
2024-02
石墨制品等静压石墨坩埚正确使用说明
等静压石墨坩埚正确运用说明: 等静压石墨坩埚在进料时,防止挤压过紧,以免金属坩埚热胀大胀大。石墨坩埚的运用寿命与其用途有关,应防止强烈的氧化火焰直接喷向坩埚,使坩埚原料氧化寿命短。运用后,放置在枯燥处,防止雨水侵略;运用前先将其缓慢烘烤至500摄氏度。取出金属熔液时,用勺子舀出,尽量用卡尺舀出,卡尺等工具应与坩埚形状一致,防止......
-
28
2024-02
石墨制品熔金石墨坩埚规格不同形式有哪些优点
石墨制品熔金石墨坩埚标准不同形式的优点: 在许多产品中石墨制品熔金石墨坩埚的标准都能遭到大家的关注,让大家看到产品的优点,并起到杰出的作用。在实际使用中,热裂解熔金石墨坩埚的实际作用也很好。产品标准和型号及其外观都有不一样的特色。 我们可以依据掌握它的使用特色,看到有许多不同种类的产品,比如方形石墨坩埚的......
-
28
2024-02
石墨制品等静压石墨坩埚易氧化的温度
石墨制品等静压石墨坩埚易氧化的温度: 铝合金熔体温度较低,为700℃-750℃,这也是石墨制品等静压石墨坩埚易氧化的温度场。因而,在抗氧化剂方面,预防配比和生产就显得尤为重要。一起还指出了含氟除渣剂的影响。熔融铜石墨坩埚选用先进的冷等静压法制作,制作压力600MPa。因而,产品内部结构均匀无缺点,强度高。一起,该坩埚壁薄,导热......
-
28
2024-02
石墨制品滑动轴承的五条故障规则
石墨制品滑动轴承的五条缺点规矩 1.瓦面腐蚀:光谱分析发现有色金属元素浓度反常;铁谱中出现了许多有色金属成分的亚微米级磨损颗粒;润滑油水分超标、酸值超标。 2.轴颈表面腐蚀:光谱分析发现铁元素浓度反常,铁谱中有许多铁成分的亚微米颗粒,润滑油水分超标或酸值超标。 3.轴颈表面拉伤:铁谱......
-
28
2024-02
石墨制品石墨衬套有什么好处
石墨制品石墨衬套的长处:自光滑,摩擦系数低。,耐化学、腐蚀和氧化,食物和药物相容性好,热膨胀系数低,优异的耐热震性,导热性好,机械功用强,耐高温。 碳石墨材料由于其耐腐蚀性强,使用寿命更长,受环境变量的影响更小。即便在极端温度下,功用依然超卓。 此外,它们适......