新闻中心
NEWS INFORMATION
-
11
2024-03
石墨制品加工如何提高体密度
石墨制品加工怎样行进体密度 为了让咱们愈加了解石墨模具加工的相关知识,今日为咱们介绍石墨制品加工怎样行进体密度的办法:1.焙烧品和在焙烧行进制品的体密度 成焦值与焙烧系统中的气氛有关,因为石墨制品内粘结剂的分化和制品的气孔率远小于填料,构成制品与填料间发生气体浓度梯度。这个梯度越大,制品内气体扩散速度越大......
-
11
2024-03
石墨制品石墨舟的应用
石墨制品石墨舟的应用 跟着工业生产加工水平的继续提升,我们对高纯度石墨制品各方面的要求也愈来愈高。 石墨制品石墨舟其实也归于石墨模具。石墨模具本来是一种载体,可把我们需求定型或许定位的原资料及零部件一同放进石墨模具里,通过高温烧结成型。 它之所以叫做石墨制品石墨舟,原因:它是一个像小......
-
11
2024-03
石墨制品如何避免石墨模具渗水
避免石墨制品石墨模具渗水需要从材料、加工工艺、烧结工艺和运用维护等方面下手。只需归纳考虑这些因素,才华保证石墨模具的质量和功用,避免出现渗水问题。一同,关于现已出现渗水的石墨模具,要及时进行处理和批改,避免影响电子元器件的质量和可靠性。具体而言,能够采用以下办法: 1.选用合适的密封材料和办法,对石墨制品石墨模具进行密封处理,......
-
11
2024-03
石墨制品热弯玻璃石墨模具的晶体结构和物理性质
石墨制品热弯玻璃石墨模具的晶体结构和物理性质 石墨制品热弯玻璃石墨模具的晶体是由很多的彼此平行的网状层面有规则地堆叠而成,每一层内的碳原子都呈正六角形环彼此联接。层面上的碳原子都由强有力的共价键相接合,而各层面彼此之间,仅有极弱的范德华力相联络。根据这种结构,就构成了热弯玻璃石墨模具的各种物理性质上的异向性。层面内的相邻碳原子......
-
11
2024-03
石墨模具制品各种特性与辐照剂量的关系
石墨模具制品各种特性与辐照剂量的联络 核石墨的辐射线辐照危害与退火具有175电子伏(eV)以上能量的中子,和石墨模具制品中的碳原子发生磕碰,碳原子便从正规的晶体点阵弹跳出去,潜入到晶体层面之间,一同在原本方位上留下一个空晶格点。众所周知,碳原子取得大约25电子伏的能量,便发生位移,脱离原本晶格点。在紧接核分裂之后,具有2百万电......
-
11
2024-03
石墨制品等静压石墨模具如何做抗氧化处理
石墨制品等静压石墨模具如何做抗氧化处理 石墨制品等静压石墨模具在生产出来后,为了更好的保护模具,一般都需求进行抗氧化处理,一般采用抗氧化剂来进行。接下来,说明劣等静压石墨模具如何做抗氧化处理。 当石墨制品等静压石墨模具的运用温度在1300℃以内的氧化环境中,它的抗氧化效果非常好。各种类型的石墨模具经过石墨模具抗氧化保护剂的渗......
-
11
2024-03
石墨制品石墨模具加工在太阳能电池片制造过程中使用要求
太阳能电池片制造过程中运用的石墨制品石墨模具加工,需求具有以下几方面的要求: 1.高纯度:石墨制品石墨模具加工的纯度越高,对太阳能电池片的影响就越小。因而,一般要求石墨模具的纯度到达99.9%以上。 2.超卓的耐磨性和抗腐蚀性:由于太阳能电池片制造过程中需求进行高温烧结和化学腐蚀等工艺,因而石......