新闻中心
NEWS INFORMATION
-
22
2024-04
石墨制品电子元件烧结石墨模具抗氧化石墨工装夹具加工的加工阶段
石墨制品电子元件烧结石墨模具抗氧化石墨工装夹具加工的加工阶段1.粗加工阶段 在粗加工阶段,需求对石墨制品电子元件烧结石墨模具抗氧化石墨工装夹具的毛坯进行初步加工,使其初步构成所需的形状和巨细。这个阶段需求进行许多的切削和磨削,因此需求运用大型的电子元件烧结石墨模具抗氧化石墨工装夹具加工设备和东西。2.半精加工阶段 &......
-
22
2024-04
石墨制品石墨模具清洁步骤是怎么样的
因此,应该根据既定的消费周期对石墨制品石墨模具连续必要的清洁。每次石墨模具从压机中取出后,首要需求翻开石墨模具气孔以肃清石墨模具和模板非要害区域的全部氧化污物和锈迹,以防止其缓慢地腐蚀钢材表面和边缘。 许多情况下,即便清洁终了,一些未涂层或易生锈的石墨制品石墨模具表面很快会再次出现锈迹。因此,即便破费了很长时间对无防护的石墨模......
-
22
2024-04
石墨制品石墨模具的硬化处理方法
石墨制品石墨模具的硬化处理方法1.熟化处理 熟化处理是最常用的石墨制品石墨模具硬化处理方法之一,可使石墨模具外表构成一层厚度约为0.2~0.3mm的石墨质保护层,然后增强其外表硬度和耐磨性。详细操作进程为:将石墨模具放入热处理炉中,加热至550~600℃,保温6~8小时,然后升温至800℃以上,保温6~8小时,再冷却至室温即可......
-
22
2024-04
石墨制品石墨模具的硬化处理概述
石墨制品石墨模具的硬化处理概述石墨制品石墨模具是一种常用于铸造作业的模具材料,具有超卓的导热功用和高温稳定性,一般可用于大型铸件的制作。但是,在使用过程中,由于长时间的高温作用,易导致模具外表老化和损坏。为了前进石墨制品石墨模具的使用寿命,有必要进行硬化处理。......
-
22
2024-04
石墨制品热压烧结石墨模具的制造过程主要包括
石墨制品热压烧结石墨模具的制作进程首要包含石墨粉末的制备、模具的成型、烧结和加工等进程。首要,需求选用高纯度的石墨粉末,并进行筛分、混合等处理,以确保模具的质量和功用。然后,将石墨粉末放入模具中,进行捆绑成型,一般选用压力机或挤压机等设备进行加工。在成型进程中,需求操控压力、温度和时间等参数,以确保模具的密度和硬度抵达要求。 ......
-
20
2024-04
石墨制品提高石墨板加工厂的设备状态和使用效果
行进石墨制品石墨板加工厂的设备状况和运用效果 翻开设备晋级赛活动、不断行进设备无缺水平。 为了确保不因设备问题而影响出产,有必要使全部设备常常处于无缺状况,做到这一点是很不简单的。石墨制品石墨板加工厂的设备一般来说比较简单出缺陷,由于维护、检修作业跟不上需求,或因操作不当(如违反规程)而导致设备事端不在少......
-
20
2024-04
石墨制品加工厂煅烧炉的改造
石墨制品加工厂煅烧炉的改造 煅烧炉的改造。我国20世纪50年代到60年代制作的石墨制品加工厂或炼铝厂的阳极糊车间其煅烧设备大都为罐式煅烧炉,这种炉型适合煅烧蒸发分较低的釜式焦化的石油焦。20世纪70年代初步,质料供应形势发生变化,炼油厂为了行进经济效益,纷乱将釜式焦化改为推迟焦化,而推迟焦含蒸发分高,进入罐式炉后在罐内简略结焦......