新闻中心
NEWS INFORMATION
-
27
2024-04
如何处理石墨制品等静压石墨模具的抗氧化性
石墨制品等静压石墨模具生产后,为了更好地保护模具,一般需求进行抗氧化剂处理,一般运用抗氧化剂进行。 当石墨制品等静压石墨模具的运用温度在1300℃以内时,其抗氧化作用非常好。各类石墨模具用石墨模具的抗氧化保护剂浸泡后,其液体可渗透到等静压石墨模具的孔隙中,在石墨模具的孔隙和石墨模具表面构成一层约0.02mm的抗氧化保护膜。&n......
-
27
2024-04
石墨制品石墨模具表面抗氧化处理方法
石墨制品石墨模具表面抗氧化处理方法 本发明公开了一种石墨制品石墨模具表面抗氧化处理方法,归于石墨抗氧化处理技术领域。该方法包括以下过程,配备纳米抗氧化浸渍液:将复合磷酸盐,高温固化剂,纳米陶瓷颗粒和水混合均匀,依照复合磷酸盐,高温固化剂,纳米陶瓷颗粒的分量百分比分别为15~40%,0.5~5%,5~20%,其余为水的比例来配备......
-
27
2024-04
导热石墨板温度的测量
石墨制品导热石墨板温度的测量 虽然石墨制品石墨化炉炉芯内各点温度存在较大的差异,但工业生产每炉都测定温度是不可取的,因此炉温首要通过“开端功率”、“上升功率”及全炉计划消耗电量进行直接操控,有时为了实验新的通电曲线,了解导热石墨板炉芯温度分布及研究温度与产品质量的联络,需求进行炉温测定。 &n......
-
26
2024-04
高纯石墨制品缺陷类型及其原因
高纯石墨制品缺陷类型及其原因 出炉后的高纯石墨制品应按工序技术条件的规定进行外观查看和丈量电阻率,抽取样品制成试样送实验室测定真密度、密度、机械强度和弹性模量、线膨胀系数等方针。石墨化工序常见的产品缺陷有裂纹、弯曲变形、碰损、氧化、电阻率不合格等。裂纹 产品表面观察到的裂纹有纵裂纹、横裂纹和网状裂纹三种,......
-
26
2024-04
高纯石墨制品平端面和镗孔工序加工目的包括哪些
高纯石墨制品平端面和镗孔工序加工目的包含哪些 平端面和镗孔。高纯石墨制品平端面和镗孔这一道工序包含3个加工目的: (1)将毛坯的两端切平,切平后的两个端面应相互平行,端面与高纯石墨制品躯干垂直。 (2)消除毛坯端面成型时的堵截痕迹以及变形、氧化、掉块等缺点并高纯石墨制品加工到必定长度......
-
26
2024-04
石墨制品质量合格的主要标准
石墨制品质量合格的首要规范 用户满意是质量合格的首要规范 石墨制品质量的好坏最终是通过用户的运用来点评,用户所运用的石墨制品质量质量好坏是通过规划、制作、查验、出售、服务等环节逐渐产生和构成的。不断提高本企业的产品质量,削减废次品,这意味着运用同样数量的原材料、动力、工时出产出数量更多的、遭到用户欢迎的优......
-
26
2024-04
石墨制品石墨轴承套的工作原理
石墨制品石墨轴承套,作为一种特别的轴承部件,首要应用于高温、高速、高负荷以及强腐蚀的恶劣环境下。其作业原理首要触及材料特性、润滑办法、抵触学原理以及热学功用等方面。 首要,从材料特性视点来看,石墨制品石墨轴承套的首要材料是石墨,这种材料具有优异的耐高温、耐磨损、耐腐蚀和自润滑等特性。在高温环境下,石墨的......